Ball Half Morse
Nylon 12 ball, designed to hold grooved tube in transom bracket or splashwell mount. Sold per half.
Ball Joint SS 12 Unf
Available in stainless steel or gold passivated steel. Used to connect threaded end steering cables to tiller rudder arm.
Ball Joint SS 38 Unf
Available in stainless steel or gold passivated steel. Used to connect threaded end steering cables to tiller rudder arm.
Ball Joint Steel 12 Unf
Available in stainless steel or gold passivated steel. Used to connect threaded end steering cables to tiller rudder arm.
Ball Joint Steel 38 Unf
Available in stainless steel or gold passivated steel. Used to connect threaded end steering cables to tiller rudder arm.
Bezel 90 Deg Black Suit D290 Helm
Black bezel mount kit includes all brackets and fastenings for installation with the 282142 helm.
Cable Control 33b 1.00m
Installed in connection with D series controls for heavy duty applications with a maximum load of up to 50kg force. Extra long travel for applications such as marine jet drive bucket control.
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Installed in connection with D series controls for heavy duty applications with a maximum load of up to 50kg force. Extra long travel for applications such as marine jet drive bucket control.
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Installed in connection with D series controls for heavy duty applications with a maximum load of up to 50kg force. Extra long travel for applications such as marine jet drive bucket control.
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Installed in connection with D series controls for heavy duty applications with a maximum load of up to 50kg force. Extra long travel for applications such as marine jet drive bucket control.
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
Specifications:
• 8mm diameter wire core
• 230mm nominal travel
• UV resistant polyethylene outer
• Wire strand reinforced outer jacket, 17.5mm O.D.
• 250mm minimum bend radius
• Stainless steel rod end, 3/8” UNF thread
• Brass output end support tube
