Minn Kota

Minn Kota is the oldest manufacturer of electric fishing motors in the world with nearly 70 years of hard-earned experience in the lab and on the water. Throughout their history, Minn Kota has led the way in product innovation and cutting-edge technology. Minn Kota offers a wide range of electric boat motors for freshwater or saltwater conditions. Electric boat motors by Minn Kota are available in different strengths (measured in pounds thrust), different shaft lengths for different sized boats, as well as bow mount, transom mount and engine mount.

Minn Kota

Sort by: Product Price Default
Actuator Trim Tab 108mm Stroke 12v
The muscle behind Lenco Trim Tabs, 340kg output. Actuators are available in 12 and 24 volt configurations in standard (57mm) stroke, or for custom installations long (108mm) stroke configuration. Actuator mount hardware is purchased separately. Actuators sold singly.
Quantity
You can specify a number from 1 to 10000.
Add to wish list
The muscle behind Lenco Trim Tabs, 340kg output. Actuators are available in 12 and 24 volt configurations in standard (57mm) stroke, or for custom installations long (108mm) stroke configuration. Actuator mount hardware is purchased separately. Actuators sold singly.
Quantity
You can specify a number from 1 to 10000.
Add to wish list
The muscle behind Lenco Trim Tabs, 340kg output. Actuators are available in 12 and 24 volt configurations in standard (57mm) stroke, or for custom installations long (108mm) stroke configuration. Actuator mount hardware is purchased separately. Actuators sold singly.
Quantity
You can specify a number from 1 to 10000.
Add to wish list
Anode Replacement TS Sp Skin Fitting
Replacement zinc anode to suit skin fittings on Isotherm SP refrigeration systems.
Quantity
Add to wish list
Battery Meter Minn Kota
Measures remaining charge in any 12 volt battery. LED readout can be easily read in sunlight. Takes the guess work out of estimating a charge. Compact and durable, fits into your pocket or tackle box.

Dimension:
85 (l) x 45(w) x 23 (h) mm excluding negative probe and curly cord.
Quantity
You can specify a number from 1 to 10000.
Add to wish list
Battery Meter Minn Kota
Instant LED readout of remaining charge at the push of a button (100/75/50/25%). Indicator light illuminates when your battery is being charged. Flush mounts on deck or in-dash. Waterproof and shock resistant, short circuit and reverse polarity protected. Supplied with 5.5m of cable with lugs to connect to the battery. Available in two models, capable of monitoring the status two or three banks of 12 volt batteries.

Intrusion: 22 mm
Protruson: 13 mm
Capacity: Two bank
Base Size: 114x58 mm
Quantity
You can specify a number from 1 to 10000.
Add to wish list
Battery Meter Minn Kota
Instant LED readout of remaining charge at the push of a button (100/75/50/25%). Indicator light illuminates when your battery is being charged. Flush mounts on deck or in-dash. Waterproof and shock resistant, short circuit and reverse polarity protected. Supplied with 5.5m of cable with lugs to connect to the battery. Available in two models, capable of monitoring the status two or three banks of 12 volt batteries.

Intrusion: 22 mm
Protruson: 13 mm
Capacity: Three bank
Base Size: 114x58 mm
Quantity
You can specify a number from 1 to 10000.
Add to wish list
Battery Test Switch 12v
Black finished aluminum panel illuminated rocker switch selects test condition of Battery one or two using rocker switch to test between Battery 1 and Battery 2 test modes.
Suits 12 volt.
Quantity
Add to wish list
Bilge Switch Pump Panel
Three position switch - manual/off/auto - to control electric submersible bilge pumps in conjunction with float switches. Features red and green indicator lights. Black finished alloy face with white graphics. Screw top fuse holder. Supplied with five amp fuse. Suitable for 12 volt applications only.

Width: 90 mm
Height: 50 mm
Intruson: 74x36 mm
Mount Screws: 3 r/h
Cut Out Size: 74x36 mm
Quantity
Add to wish list
Bilge Switch Pump Panel With Alarm
Black finished aluminium panel with three position switch, fuse and audible and visual alarm function. Used to control any submersible bilge pump up to 10amp current draw, fitted with a float switch. Switch has manual/off/auto positions with spring return to off from the manual position. Red indicator light and audible alarm activates if bilge pump fails when in auto mode. A green light shows when operating correctly. Suitable for 12V DC applications only.

Width: 115 mm
Height: 64 mm
Intruson: 40 mm
Mount Screws: 3 r/h
Cut Out Size: 84x40 mm
Quantity
Add to wish list